Bleeding Tissue Paper Tutorial – Modern Throw Pillow

IMG_20160324_130612 (1)

Hello there! This is a very simple project. If you can cut strips of paper, you can do this. I mean it, no joke. So let’s dig in!

Materials:

Tutorial

Step 1: Add 2 tablespoons of soda ash to 4 cups of warm water. Give your soda ash a few minutes to dissolve and add your fabric. Soak for 15 – 30 minutes.

FYI – This bleeding tissue paper technique was one of the first methods that I ever used to dye fabric! I saw a tutorial on the Dharma Trading website and it seemed so easy. However, I had trouble with the dye not fixing well which resulted in faded fabric and/or dye that ran endlessly when the fabric was washed. I have since read suggestions to use a vinegar soak prior to dyeing or to spray the tissue with vinegar (in fact I think the Dharma site has changed their tutorial to include vinegar). However, I have also read multiple comments from folks saying that they still had problems with the color running. So this is where the soda ash comes in. Although it is more typically used as a fixative for fiber reactive dyes, it does a good job of fixing this dye. I have also noticed that some of the pillow cases that I made long ago without the use of vinegar or soda ash seemed to have fixed well after heat setting. However, these pieces sat for about a year before I heat set and washed them (I had tossed them aside since it had been such a struggle to set this dye!). So, maybe no fixative is required if you don’t wash your piece for a good long while. 🙂

P.S. – I have only used this product on silk, but from what I understand there are no restrictions on the type of fabric that you can use.

IMG_20160322_123625 (2)

Step 2: Wring out your fabric and lay your pillow case on a work surface. Make certain to smooth out your fabric as much as possible.

You may wish to use gloves to do this because although soda ash is no more toxic than laundry detergent (which typically contains a lot of soda ash) it can irritate your skin. If you choose not to wear gloves please be sure to wash your hands well after handling your fabric.

IMG_20160322_123954 (1)

Step 3: Grab one sheet of bleeding tissue paper in the color of your choice. I love the combination of black and white, but you can use whatever color or design you wish! I folded my paper in half and then in half again and I used a pencil and a yardstick to draw lines (some wide and some more narrow). I cut along the lines without being too finicky.

Step 4: Lay your tissue paper on your fabric. I like to spritz the paper with water and smush it down with my finger tips as I go to insure that the tissue is making good contact with the fabric.

IMG_20160322_134408 (1)

As you can see from the picture above, there is a colorful halo around the edges of the paper. The black bleeding tissue paper by Spectra Art is the only color that does this. The effect generally gets stronger as the paper dries…so fun!

Step 5: Once your pillow case and your tissue paper are completely dry lift up your paper and check out your design. If you are happy with your result, iron your fabric for three to five minutes to further set the color, wash it with a mild detergent and rinse until your water runs clear. Please note that even with the soda ash fixative you will still get some dye run off when you wash your fabric.

This is my result. I’m not thrilled with it, it’s just okay. I like how the lines look layered but I would like them to be much darker and more solid. Since I have plenty of tissue paper strips left, I’m going to go over my lines a second time. Fingers crossed!

IMG_20160323_100139

Step 6: I’m really hoping that you won’t need a step six, but I definitely do! I sprayed the pillow case with water until it was fairly saturated and then I laid down my strips and sprayed them with water.

IMG_20160323_101125

As you can see there is much more dye bleeding out around the edges this time. I think that this is because I used a much bigger spray bottle and my tissue paper was really wet. I have to say that I’m kinda loving the juxtaposition between the straight black lines and the more fluid lines where the dye is bleeding.

This is how it looked when it was dry and I pulled off all of the paper.

IMG_20160323_160903 (4)

The “halo” effect is much stronger this time and I’m kind of obsessed with the bright yellow and pink that showed up at the bottom. It’s so cool how the black tissue paper leaches out pink, yellow, and blue! But it totally makes sense since black is composed of red (magenta), yellow, and blue (cyan).

*If you end up doing another layer of tissue paper, don’t forget to heat set your fabric and wash it in a mild detergent. There is no need to do this in between each layer. It’s only necessary to complete this step when you are all done. 🙂

Now here it is after it was heat set, washed and ironed again to get the wrinkles out.

 

IMG_20160324_125709 (1)

The black faded a tiny bit but the biggest thing that I noticed is that most of the yellow and some of the pink washed out. 😦 It’s still really pretty but I wish that those colors had stayed put!

Now here’s the cover shot!

IMG_20160324_130612 (1)

Comments and questions are welcome. Thanks for stopping by!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s